Gas Turbine Wind Turbine Oil & Gas Industries Hydropower, Solar Power & Biomass WIND TURBINE AND WIND FARM: CFD, MDB & FINITE ELEMENT BASED DESIGN

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Vibration Fatigue Finite Element Simulation:

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Underbody & Underhood Simulation Battery Thermal Management: Simulation Based Design Brake Thermal Modeling Cabin Aerodynamics: Thermal Comfort & HVAC Aeroacoustics Vehicle Thermal Management: CFD and

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Unidirectional composites (UD) Simulation-Based Design

Underbody & Underhood Simulation Battery Thermal Management: Simulation Based Design Brake Thermal Modeling Cabin Aerodynamics: Thermal Comfort & HVAC Aeroacoustics Underbody & Underhood Simulation for

Turbomachinery Generative Design & Optimization Heat Transfer Simulations for Turbomachinery Turbine, Pump & Compressor (Axial or Centrifugal) Design Turbomachinery Generative Design & Optimization FEA &

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Turbomachinery Generative Design & Optimization Heat Transfer Simulations for Turbomachinery Turbine, Pump & Compressor (Axial or Centrifugal) Design Turbine, Pump & Compressor (Axial or Centrifugal):

Multiphysics FEA & CFD Based Simulation Training Courses Including Thermal Stress, Vibration, Acoustics, Fatigue and Programing aspects Enteknograte , as the leading FEA and CFD

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Hydrodynamic Performance of Ship Hull Structural Dynamics Integrity Propulsion Systems & Cavitation HVAC Design Structural Dynamics Integrity & Vibro-Acoustics Simulation for Marine & Shipbuilding Industry:

Engine Simulation Fracture Simulation Structural Dynamics Composites Design Drone Aerodynamic & Acoustic Simulation Rotors Aerodynamic Simulation Turbomachinery Electromagnetic Multiphysics Simulation of Plasma Based Devices: Particle

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Simulia Abaqus: Crash Test, Fracture & Damage, Blast & Explosion, Impact & Penetration, Thermal Analysis, Drop Test, Acoustics and Vibro-Acoustics Many real-world engineering problems involve

Simulation of Plasma Based Devices: Microwave Plasma and RF Plasma Analysis with Coupling Particle in Cell (PIC), MHD, CFD and FEA Solvers Enteknograte is in

Simufact Welding Simufact Welding is used for modelling and optimising a wide range of fusion and pressure welding processes, taking into account weld sequence and

Simufact Forming Simufact Forming is an established software solution for the simulation of metal forming manufacturing processes. The software covers all essential areas of forming

Simufact Additive Simufact Additive is a scalable software solution for the simulation of metal-based additive manufacturing processes which focuses on powder bed melting (L-PDF) and

Simcenter STAR-CCM+: Multiphase Fluid Flow, Aerodynamics, Aeroacoustics, Hydrodynamics, Combustion, Heat Transfer, Fluid Structure Interaction (FSI), HVAC and Thermal Comfort Simcenter STAR-CCM+ is a comprehensive computational

Aerospace Engineering: AeroAcoustics and VibroAcoustics Automotive Industry: AeroAcoustics and VibroAcoustics design Hybrid & Electric Vehicles: NVH & Acoustics Shipbuilding Acoustics and VibroAcoustics Engineering Audio &

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Sheet Metal Forming: Advanced

Drone Aerodynamic & Acoustic Simulation Aerodynamic Noise Simulation Rotors Aerodynamic Simulation Green Energy: Wind Turbine & Wind Farm Race Car Aerodynamic Simulation Cabin Aerodynamics: Thermal

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Finite Element Simulation of

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Reactor Design

Drone Aerodynamic & Acoustic Simulation Aerodynamic Noise Simulation Rotors Aerodynamic Simulation Green Energy: Wind Turbine & Wind Farm Race Car Aerodynamic Simulation Cabin Aerodynamics: Thermal

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Patran: Complete FEA Modeling Solution Patran is the world’s most widely used pre/post-processing software for Finite Element Analysis (FEA), providing solid modeling, meshing, analysis setup

Orthopedic Implants Dental Implants Cardiovascular Implants Craniomaxillofacial & Plastic Surgery Finite element analysis of Orthopedic Implants FEA & CFD Based Simulation Design Analysis Virtual prototyping MultiObjective Optimization

Gas Turbine Wind Turbine Oil & Gas Industries Hydropower, Solar Power & Biomass Oil, Gas and Petrochemical Industries: Finite Element and CFD Simulation for Offshore

ODYSSEE: AI & Machine Learning for CFD, FEA, Statistics, Data Mining, Data Fusion, Optimization and Robustness ODYSSEE CAE is a unique and powerful CAE-centric innovation

Aerospace Engineering: AeroAcoustics and VibroAcoustics Automotive Industry: AeroAcoustics and VibroAcoustics design Hybrid & Electric Vehicles: NVH & Acoustics Shipbuilding Acoustics and VibroAcoustics Engineering Audio &

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Aerospace Engineering: AeroAcoustics and VibroAcoustics Automotive Industry: AeroAcoustics and VibroAcoustics design Hybrid & Electric Vehicles: NVH & Acoustics Shipbuilding Acoustics and VibroAcoustics Engineering Audio &

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Multiphase Simulation

Multi-Phase Flows CFD Analysis FEA & CFD Based Simulation Design Analysis Virtual prototyping MultiObjective Optimization Multi-Phases flows involve combinations of solids, liquids and gases which interact. Computational

Multiobjective Optimization for CFD and Finite Element Based Multiphysics Multiobjective optimization involves minimizing or maximizing multiple objective functions subject to a set of constraints. Example

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

MSC Nastran: Multidisciplinary Structural Analysis MSC Nastran is a multidisciplinary structural analysis application used by engineers to perform static, dynamic, and thermal analysis across the

MSC Marc: Simulate products more accurately with the industry’s leading nonlinear FEA solver technology Marc is a powerful, general-purpose, nonlinear finite element analysis solution to

MSC Dytran: Explicit Transient Dynamic Solution for Crash, Impact, Blast, Explosion and Fluid-Structure Interaction Dytran is an explicit finite element analysis (FEA) solution for simulating

MSC Co-Simulation – where Multiphysics gets Real Co-simulation provides engineers with a unique, more complete & holistic performance insight by coupling together multiple simulation disciplines.

MSC Apex Generative Design Smart Generative Design for an unmatched Design for Additive Manufacturing Experience Contact us for free demo or quote https://enteknograte.com/wp-content/uploads/2022/06/apex-animation.mp4 Not all

MSC Apex: Unified CAE Environment for Virtual Product Development CAE specific direct modeling and meshing solution that streamlines CAD clean-up, simplification and meshing workflow. Contact

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Mixer Design

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Metal Forming: Finite Element

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Metal Forming Process: Open

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Metal Forming Simulation: FEA

Directed Energy Deposition (DED) & Laser Metal Deposition Powder Bed Fusion Processes: Finite Element Simulation Metal Binder Jetting: Finite Element Simulation-Based Design Additive Manufacturing of

MaterialCenter: Materials Lifecycle Management MaterialCenter is a Materials Lifecycle Management System designed to link material specialists to mechanical simulation. MaterialCenter captures data from integrated processes

Hydrodynamic Performance of Ship Hull Structural Dynamics Integrity Propulsion Systems & Cavitation HVAC Design FEA & CFD based Design and Optimization for Marine and Shipbuilding

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Industrial Equipment and Rotating Machinery FEA and CFD based Design and Optimization FEA & CFD Based Simulation Design Analysis Virtual prototyping MultiObjective Optimization Enteknograte’s FEA and CFD

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Orthopedic Implants Dental Implants Cardiovascular Implants Craniomaxillofacial & Plastic Surgery In Silico Medical & Biomedical Device Testing: Finite Element, CFD & Electromagnetic Simulation and Design,

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Hydrodynamic Performance of Ship Hull Structural Dynamics Integrity Propulsion Systems & Cavitation HVAC Design Hydrodynamic Performance of Ship Hull: CFD Based Design FEA & CFD

Hydrodynamic Performance of Ship Hull Structural Dynamics Integrity Propulsion Systems & Cavitation HVAC Design HVAC Design for Ships and Offshore Structures FEA & CFD Based

Hexagon Manufacturing Intelligence Hexagon Manufacturing Intelligence helps industrial manufacturers develop the disruptive technologies of today and the life-changing products of tomorrow. MSC Software Corporation is

Turbomachinery Generative Design & Optimization Heat Transfer Simulations for Turbomachinery Turbine, Pump & Compressor (Axial or Centrifugal) Design Heat Transfer Simulations for Turbomachinery Including FSI

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Heat Transfer-Equipment

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Hard Metal: Finite Element Simulation

Drone Aerodynamic & Acoustic Simulation Aerodynamic Noise Simulation Rotors Aerodynamic Simulation Green Energy: Wind Turbine & Wind Farm Race Car Aerodynamic Simulation Cabin Aerodynamics: Thermal

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Directed Energy Deposition (DED) & Laser Metal Deposition Powder Bed Fusion Processes: Finite Element Simulation Metal Binder Jetting: Finite Element Simulation-Based Design Additive Manufacturing of

Gas Turbine Wind Turbine Oil & Gas Industries Hydropower, Solar Power & Biomass Gas turbine simulation: spray, combustion, emissions, Shaft and Gear Systems, acoustic enclosures

Gas Turbine Combustion Fuel Injectors & Spray CFD Simulation Engine Exhaust Aftertreatment Detailed Chemistry & Multiphase Flow Modeling Coupling with 1D Modeling Gas Turbine Combustion

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

Gas Turbine Combustion Fuel Injectors & Spray CFD Simulation Engine Exhaust Aftertreatment Detailed Chemistry & Multiphase Flow Modeling Coupling with 1D Modeling Fuel Injectors and

Engine Simulation Fracture Simulation Structural Dynamics Composites Design Drone Aerodynamic & Acoustic Simulation Rotors Aerodynamic Simulation Turbomachinery Electromagnetic Multiphysics Simulation of Plasma Based Devices: Particle

Fracture and Damage Simulation: Advanced constitutive Equation for Materials behavior in special loading condition FEA & CFD Based Simulation Design Analysis Virtual prototyping MultiObjective Optimization In materials

Fluid Structure Interaction (FSI) Fluid Structure Interaction (FSI) calculations allow the mutual interaction between a flowing fluid and adjacent bodies to be calculated. This is

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Floating, Fixed & Gravity-Based Structures Design Resistance, Propulsion, Sea-Keeping & Maneuvering HydroAcoustics simulation for AIV (Acoustic Induced Vibration) Ship Stability & Safety Analysis Hydroplaning (Aquaplaning)

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Directed Energy Deposition (DED) & Laser Metal Deposition Powder Bed Fusion Processes: Finite Element Simulation Metal Binder Jetting: Finite Element Simulation-Based Design Additive Manufacturing of

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Finite Element Simulation of Plastic

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Finite Element Simulation of

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Finite Element Simulation of Crash Test and Crashworthiness with LS-Dyna, Abaqus and PAM-CRASH Including Airbag & Seat Belt Effectiveness, Electric Vehicles (EV), Trucks, Bus and

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Finite Element Simulation of Braided

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

Gas Turbine Wind Turbine Oil & Gas Industries Hydropower, Solar Power & Biomass Hydropower, Solar Power and Biomass FEA & CFD Based Simulation Design Analysis

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Finite Element Analysis of Durability

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Gas Turbine Wind Turbine Oil & Gas Industries Hydropower, Solar Power & Biomass FEA & CFD based Simulation Design to Improve Productivity and Enhance Safety

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Filtration System

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Finite element simulation of woven

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite FEA Based Simulation of Rubber

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Composites Fatigue Finite Element Simulation

Engine Simulation Fracture Simulation Structural Dynamics Composites Design Drone Aerodynamic & Acoustic Simulation Rotors Aerodynamic Simulation Turbomachinery Electromagnetic Multiphysics Simulation of Plasma Based Devices: Particle

The need for CO₂ reduction, the increasing complexity of new powertrain systems, and a requirement to achieve the highest possible level of process efficiency –

Finite Element and CFD Based Simulation of Casting Using Sophisticated FEA and CFD technologies, Enteknograte Engineers can predict deformations and residual stresses and can also

Orthopedic Implants Dental Implants Cardiovascular Implants Craniomaxillofacial & Plastic Surgery Finite element & CFD analysis of Cardiovascular Implants FEA & CFD Based Simulation Design Analysis

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Resistance Spot Welding: Finite Element Simulation of RSW Arc Welding Finite Element Simulation Pressure Welding FEA Simulation Brazing Simulation Stress Relief Heat Treatment Laser &

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Fatigue Analysis of Welded Structures

eVTOL (Electric Vertical Take-Off and Landing) & UAM (Urban Air Mobility): FEA & CFD Based Simulation for Ground Vibration Testing (GVT), Airworthiness Certification, Aerodynamics, Aeroacoustics

Engine Simulation Fracture Simulation Structural Dynamics Composites Design Drone Aerodynamic & Acoustic Simulation Rotors Aerodynamic Simulation Turbomachinery Electromagnetic Multiphysics Simulation of Plasma Based Devices: Particle

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Noise, Vibration & Harshness – NVH for Electric Motors Induction Heating Multiphysics Simulation Electric Motors Cooling System Analysis Power Transformer: Finite Element-Based Design Electrical Motor

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Elastomer Materials Fatigue Finite Element

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridege Design & Analysis Ventilation

Drone Aerodynamic & Acoustic Simulation Aerodynamic Noise Simulation Rotors Aerodynamic Simulation Green Energy: Wind Turbine & Wind Farm Race Car Aerodynamic Simulation Cabin Aerodynamics: Thermal

Woven fabric composites Braided Composites Unidirectional composites (UD) Discontinuous Fiber Composites Reinforced plastic composite Hard Metal composites Rubber Matrix Composite Discontinuous Fiber Composites: Finite Element

Directed Energy Deposition (DED) & Laser Metal Deposition Powder Bed Fusion Processes: Finite Element Simulation Metal Binder Jetting: Finite Element Simulation-Based Design Additive Manufacturing of

Orthopedic Implants Dental Implants Cardiovascular Implants Craniomaxillofacial & Plastic Surgery Finite element analysis and Digital Twin for Orthopedics, Dental and Medical Device Industry FEA &

Digimat: Nonlinear Multi-scale Material and Structure Modeling Platform Digimat technology provides design tools that give the user 100% confidence in their composites products thanks to

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Creep and Creep-Fatigue Interactions: Finite

Orthopedic Implants Dental Implants Cardiovascular Implants Craniomaxillofacial & Plastic Surgery Finite element analysis of Craniomaxillofacial and Plastic Surgery FEA & CFD Based Simulation Design Analysis

Cradle CFD: scSTREAM | HeatDesigner, scFLOW | SC/Tetra Cradle CFD is a series of practical, state-of-the-art CFD simulation and visualization software. Embracing remarkable processing speed,

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

Full Vehicle MBD: Car Ride, Driveline, Engine & Tire MBD Robots Dynamics & Performance Assessment Control Systems Complicated Machinery & Mechanical Drive Systems Multibody Dynamics

Turbomachinery Generative Design & Optimization Heat Transfer Simulations for Turbomachinery Turbine, Pump & Compressor (Axial or Centrifugal) Design Coupled CFD & FEA for Turbomachinery Analysis:

Engine Simulation Fracture Simulation Structural Dynamics Composites Design Drone Aerodynamic & Acoustic Simulation Rotors Aerodynamic Simulation Turbomachinery Electromagnetic Multiphysics Simulation of Plasma Based Devices: Particle

Elastomer Materials Fatigue Design Composites Fatigue Finite Element Simulation Vibration Fatigue Creep and Creep-Fatigue Interactions Fatigue Analysis of Welded Structures Composites Fatigue Finite Element Simulation

Sheet Metal Forming Hot Forging Open Die Forging Cold Forming Roll Forming & Ring Rolling Heat Treatment Simulation for Metal Forming Cold Forming Finite Element

Filtration System Design Multiphase Simulation for Chemical Processing Mixer Design and Analysis Heat Transfer-Equipment Design Reactor Design & Combustion Engineering for Chemical Processing Chemical Processing

Vehicle Thermal Management Simulation Electronic Systems Cooling & Heating Heat Exchangers: Simulation-Based Design for Thermal Performance Thermal Stress Simulation Buildings Thermal Management: HVAC/Climate Control Analysis

Gas Turbine Combustion Fuel Injectors & Spray CFD Simulation Engine Exhaust Aftertreatment Detailed Chemistry & Multiphase Flow Modeling Coupling with 1D Modeling CFD Simulation of

Gas Turbine Combustion Fuel Injectors & Spray CFD Simulation Engine Exhaust Aftertreatment Detailed Chemistry & Multiphase Flow Modeling Coupling with 1D Modeling CFD Simulation of

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Hydrodynamic Performance of Ship Hull Structural Dynamics Integrity Propulsion Systems & Cavitation HVAC Design CFD Analysis of Propulsion Systems and Cavitation for Marine and Shipbuilding

CAEfatigue: FEA Based Fatigue, Durability & Random Response Solution CAEfatigue is a random response and vibration fatigue solver for the frequency domain plus a fatigue

Drone Aerodynamic & Acoustic Simulation Aerodynamic Noise Simulation Rotors Aerodynamic Simulation Green Energy: Wind Turbine & Wind Farm Race Car Aerodynamic Simulation Cabin Aerodynamics: Thermal

Underbody & Underhood Simulation Battery Thermal Management: Simulation Based Design Brake Thermal Modeling Cabin Aerodynamics: Thermal Comfort & HVAC Aeroacoustics Brake Thermal Modeling FEA &

FEA (Finite Element Analysis) & CFD Based Simulation of Blast, Explosion & Fire: Blast Resistance Certification with Protection Against Ballistic Attacks for Windows, Doors, Buildings

Underbody & Underhood Simulation Battery Thermal Management: Simulation Based Design Brake Thermal Modeling Cabin Aerodynamics: Thermal Comfort & HVAC Aeroacoustics Battery Thermal Management: Simulation Based

Aerospace Engineering: AeroAcoustics and VibroAcoustics Automotive Industry: AeroAcoustics and VibroAcoustics design Hybrid & Electric Vehicles: NVH & Acoustics Shipbuilding Acoustics and VibroAcoustics Engineering Audio &

NVH & Acoustics for Powertrain Powertrain Engineering Flow, Combustion and Emission Thermal & Energy Management Strength and Durability Analysis Turbocharging Simulation Injection Nozzle Development Quenching:

Aerospace Engineering: AeroAcoustics and VibroAcoustics Automotive Industry: AeroAcoustics and VibroAcoustics design Hybrid & Electric Vehicles: NVH & Acoustics Shipbuilding Acoustics and VibroAcoustics Engineering Audio &

Integrated Artificial Intelligence (AI) & Machine Learning – Deep Learning with CFD & FEA Simulation Machine learning is a method of data analysis that automates

Earthquake engineering & Seismic Design Tunnel Design & Analysis Finite element analysis of Concrete Geotechnical Engineering Dam Design & Analysis Bridge Design & Analysis Ventilation

Ansys Sound: Acoustic Analysis and Sound Design Ansys Sound enables you to listen to, analyze and design sound sources based on real acoustics measurements or

Ansys nCode DesignLife: Stress & Strain Based Fatigue Life Prediction Ansys nCode DesignLife works with Ansys Mechanical to reliably evaluate fatigue life. Using the results

Ansys Mechanical: Composites, Vibration, Acoustics, Thermal Analysis, Crack and Fracture, Structural Optimization, Fatigue Life Analysis, Hydrodynamics (Ansys Aqwa). Ansys Mechanical is a best-in-class finite element

Ansys Maxwell: Low-Frequency Electromagnetic Simulation for Electric Machines Ansys Maxwell is an electromagnetic field solver for electric machines, transformers, wireless charging, permanent magnet latches, actuators,

Ansys LS-DYNA Multiphysics Solver: industry-leading explicit simulation software for drop tests, impact and penetration, smashes and crashes, occupant safety, and more. LS-DYNA fully automated contact

Ansys HFSS: Multipurpose High Frequency Electromagnetic Field Simulator for RF, Microwave, Advanced Driver Assistance Systems (ADAS), Multipaction, and Electromagnetic Interference and Compatibility (EMI/EMC) Ansys HFSS

Ansys Fluent: Create advanced physics models , generates accurate and reliable fluid simulation results —all in a customizable and intuitive space Ansys Fluent unlocks new

Ansys EMA3D Charge/Cable: Electromagnetic Interference, Radiation Ionization Effects in Spacecraft, Electrostatic Discharge, Plasma Enhanced Chemical Vapor Deposition (PE-CVD) The growth in electrification of consumer, industrial